Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cleaning mode
First use
During the first use, the robot will scan the room(s) and then provide insight into the room via a
map. This map can then be used in the future. This also improves the robot's process, because
it better knows where it is.
Cleaning modes
Depending on the different cleaning needs, the product has a variety of cleaning modes to
choose from.
You can start different cleaning modes through the remote control or through the APP.
NOTE:
Do not move the robot randomly or frequently during cleaning. After moving, place the robot
near its original position. When it restarts, it will try to position itself again.
After successful positioning, it will follow the planned path and continue working.
If positioning fails, the robot will abort the previous mission, create a new map and clean again.
Automatic cleaning
After the first use, the robot generates a map according to the actual home environment after
booting. You press cleaning
on the remote control or in the APP.
Spot cleaning APP
When a local area needs extra cleaning, you can select this spot in the app on the map. The
robot will then clean within a radius of 1.5 m x 1.5 m with the starting position as a central
point. Remove any obstacles from the path of the SPOT cleaning. After the SPOT cleaning is
complete, the robot will end the task. To send the robot back to its charging station, tap
.
Spot cleaning remote control
When a local area needs extra cleaning, you can select this spot by remote control
, if the
robot cannot be controlled with the mobile APP. Move the robot to the place you want to clean.
The robot will then clean within a radius of 1.5 m x 1.5 m with the starting position as a central
point. Remove any obstacles from the path of the SPOT cleaning.
After the SPOT cleaning is complete, the robot will end the task. To send the robot back to its
charging station, tap
.
Route after the room(s) have been
mapped.
Suction adjustment
Press the button
,
in the APP or on the remote
control, to adjust the suction power (low/ high).
Manual control
Press direction button in APP (settings -> manual) or remote
control
to control robot going forward, backward, right or
left.
Virtual wall
Select the ''map edit'' function in the APP to isolate an
area that does not require cleaning. You can use this
function to isolate areas that don't need cleaning.
13
Werbung
