Clean Air Optima RVC-002B Smart Gebrauchsanweisung Seite 14

Operation instruction
Remove loose objects from the floor before cleaning the floor.
1. Turn on power, press the main switch.
''|'' means turn on the robot vacuum cleaner.
''O'' means turn off the robot vacuum cleaner.
2. Press the button start/ pause
the button once again for a pause.
3. Standby mode
The robot (in standby mode) will go into sleep mode after 3 minutes and all indicators will
go off. You can use any button on the robot, remote control or APP to restart the robot.
4. Switch off:
After the host stops working, you can manually turn off the main power switch and the
robot will shut down.
After the robot has finished cleaning, leave the robot on and charge the robot for the next
time you will use it. If you don't use the robot for a long time, turn off the power switch.
Operation instruction remote control/ APP
1. Timer (APP control)
Set a timer that indicates when the robot should start cleaning at specific times.
2. Manual (APP control and remote control)
Control the robot manually with the remote control or the APP.
3. Find robot (APP control)
Select this option if you have lost your robot. Then the robot will tell you where it is located.
4. Room manage (APP control)
Use this function to manage your rooms.
5. Mopping (APP control and remote control)
Start mopping function/ Stop mopping function.
6. Water dosing (APP control)
Control the water dosage and choose between low, medium or high. This will regulate the
mop's wetness.
7. Record (APP control)
This allows you to view all your previous cleaning sessions. Here you can see the number of
square meters that have already been cleaned and how long it took.
You can also find previously saved folders, which is ideal if you use the robot on different
floors.
14
to start cleaning. Press
Main switch