Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Charging/ Self empty station
Place the self empty station against the wall and on a
hard, flat surface. Don't place the self empty station in
direct sunlight. Give the self empty station a free
space of about 30 to 50 cm on the left and right.
Provide a clear view of the self empty station at the front
from one meter to one and a half meters. Make sure the
area around the self empty station is clear so that the
device can navigate easily.
Warning: To prevent your robot from falling down stairs, make sure the self empty station is
at least 1.2 meters away from the stairs.
Charging:
Put the power cord into the socket.
Connect the robot vacuum cleaner to the
self empty base/ charging station.
Press the 'HOME'
automatically charging.
During charging, the indicator light
flashes. Once charging is complete,
the indicator light turns green.
During the cleaning process, the robot vacuum cleaner may conclude that its battery
power is insufficient and automatically enter the charging mode to find the self emtpy base for
charging.
You can also instruct the robot vacuum cleaner to enter the charging mode with the charging
button on the remote control or via the APP.
Pay attention to charging:
1. The self emtpy station cannot be used in an environment with strong reflection, such as
direct sunlight or nearby mirrors.
2. The charging time is about 6 hours.
3. When charging, do not install the water tank on the robot vacuum cleaner, to ensure the
safety of charging and prevent wet mops from damaging the floor.
Please fully charge the robot vacuum cleaner before first use.
If the self empty station/ charging station has been moved, the robot may lose positioning
and the map. Then when the robot is restarted, it will rebuild and remember the map.
12
button for
Place against the wall
Werbung
