Clean Air Optima RVC-002B Smart Gebrauchsanweisung Seite 17

3. Place the dustbin back into the robot.
Important:
Do not rinse or soak the dustbin. Clean the dustbin regularly to prevent accumulation of dirt.
Clean the mop
The mop may be washed at a maximum of 40 degrees by hand or in a washing machine.
Do not put the mop in a dryer afterwards.
Replace HEPA filter and carbon filter in the dustbin
Open the HEPA filter cover and remove the HEPA filter, carbon filter and pre-filter (1. & 2.).
The pre-filter can be cleaned with water (3.). Replace the carbon filter and HEPA filter if
necessary.
1. 2. 3.
Install the parts in the following order:
Pre-filter first, then carbon filter and finally the HEPA filter.
Warning!
Do not damage the filters, the filters must not be cracked. Damaged filters needs to be
replaced.
Never wet or rinse the carbon filter and HEPA filter with water. The carbon filter and HEPA filter,
which are rinsed with water, needs to be replaced.
Signs for used up HEPA filter that needs to be replaced
Increased sound, congested filters, rising presence of smells.
Filters needs also to be replaced by new ones when the HEPA Filter changes its color from
white to grey or black. If the HEPA Filter remains white, there is NO need to replace the filters.
How to order filters:
Contact Clean Air Optima® Customer Service tel. + 31 (0) 742670145 or visit our webshop:
https://www.cleanairoptima.com/-accessoires
17