Clean Air Optima RVC-002B Smart Gebrauchsanweisung Seite 18

Cleaning and maintenance
Watertank maintenance.
1. Take out the water tank from the robot vacuum cleaner.
2. Remove the mop and drain the water from the water tank.
3. Clean the mop (by hand) and let the water tank and mop dry.
Do not put the mop in a dryer afterwards.
4. Put the water tank back in the robot vacuum cleaner.
1.
3.
Clean drive wheels, universale wheel sensors and charging pole.
Use the cleaning brush to remove hair and dirt from the front caster wheel.
Important:
If the front wheel is stuck with hair or dirt, the floor may be damaged.
If the wheel does not spin freely after cleaning it, please contact customer service.
Clean the universal wheel
Clean the sensors using a clean, dry cloth.
18
Clean the sensors
2.
4.
Clean the drive wheels
2.