WARNING!
m
Do not use accessories not
u
recommended by PARKSIDE. This
may result in electric shock or fire.
Suitable battery packs and chargers
Battery pack:
X 20 V Team
Charger:
X 20 V Team
Attaching/removing the
battery pack
CAUTION! Risk of injury!
m
Always lock the on/off switch
u
avoid accidental starting by moving
the rotation direction switch
the centre position (Lock) before
attaching/removing the battery
pack
.
[
]
Removing the battery pack: Press
o
the battery pack release button
Remove the battery pack
Attaching the battery pack: Align the
o
battery pack
[
]
it into it. Ensure it clicks noticeably
in place.
The battery pack can only be inserted
into the product in one direction.
Checking the battery pack
charging level
Check battery pack charge level: Press
o
the
button
[
LEDs
light up:
[
]
LED
[
]
Red/orange/green
Red/orange
Red
34 GB/IE
to
[
7 ]
into
[
6 ]
.
[
]
.
[
]
to the handle and slide
. The charging level
]
Charging level
Maximum
Medium
Low
Charging the battery pack
NOTE
The battery pack
u
at any time without reducing its life.
Interrupting the charging process
u
does not damage the battery
pack
.
[
]
Charge the battery pack
o
operation when it is at medium or low
charging level.
The charging control LEDs (green
o
and red
) indicate the status of the
[
]
charger
and the battery pack
[
]
LED
Red LED lights up
Green LED lights up
Green and red LED
ashing
Red LED ashing
Green LED lights up
(without battery pack) Charger ready
1. Insert the battery pack
charger
.
[
]
2. Connect the mains plug of the
charger
to the socket.
[
]
3. When the battery pack
charged: Remove the battery pack
from the charger
the mains plug of the charger from
the socket.
Attaching/removing the
accessory tool
CAUTION! Risk of injury!
m
Accessory tools can be sharp
and may become hot during use.
Always wear protective gloves
when handling accessory tools!
may be charged
[
]
before
[
]
[
:
[
]
Status
Battery pack
charges
Battery pack fully
charged
Battery pack
defective
Battery pack too
cold or too warm
into the
[
]
is fully
[
]
. Then disconnect
[
]
]