Safety Precautions - Sam X'comp Teile Und Technische Betriebsanleitung

You have just acquired an X'COMP®, the new XCP-45 spring compressor. Please read this You have just acquired an X'COMP®, the new XCP-45 spring compressor. Please read this
manual carefully before using your equipment for the fi rst time. This manual contains manual carefully before using your equipment for the fi rst time. This manual contains
all the information that will allow you to familiarise yourself with your equipment
and use it quickly and eff ectively. Thank you for the trust you have placed in us.
NEVER THROW THIS DOCUMENT AWAY:
KEEP IT CAREFULLY! MAKE SURE THIS DOCUMENT
IS READ BY THE END USER!

SAFETY PRECAUTIONS

This equipment is not intended for use by anyone
(including children) with reduced physical,
sensory or mental capacities, or by people with no
experience or knowledge of the equipment except
if they are supervised by a safety supervisor, or
have benefi ted from prior training on how to use it.
Care should be taken to ensure children do not play
with the equipment.
CAUTION : The compressor must always be used
in its initial safety confi guration, such as it was
delivered. Any utilisation other than that it was
intended for is to be considered incorrect and
unreasonable.
WARNING : In order to function, the equipment
must be connected to a lubricated compressed air
network at a pressure comprised between 6.5 bar
min. and 10 bar max. The equipment must be used
in a temperature range comprised between 0°C and
+40°C. Acoustic power level: approximately X dB (A).
16 / 124
The equipment is designed for use indoors and
without being exposed to the rain. The product
must be sealed to the fl oor with a SPIT cartridge on
a clean, fl at surface.
The equipment must be used in the upright
position placed on a fl at fl oor. Before fi rst using
the equipment, use your PPE > protection goggles,
safety shoes, head protection, safety gloves.
Do not dismantle the equipment, do not replace
its components. This product can only be used
to replace McPherson-type stay rods.
If you have to destroy your compressor, this must
be done in line with the regulations that apply
in your country. Check the condition and correct
operation of the safety hatch present at the level
of the shock absorber' s upper cup. The safety hatch
must only be used in case of necessity when the
equipment is in operation.
EN