DISPOSAL
ed
tilt
Compressor unit
nto
In accordance with Directive 2012/19/EC, the symbol on the equipment indicates that the equipment
he
to be disposed of (excluding accessories) is considered as waste and must therefore be subject to
her
'separate collection' . Therefore, the user must deliver this waste (or have it delivered) to the separate
be
collection centres set up by the local authorities, or hand it over to the retailer when purchasing a
new appliance of an equivalent type. Separate waste collection and subsequent treatment, recovery and
ry,
disposal operations promote the production of equipment from recycled materials and limit the negative
d if
environmental and health effects caused by improper waste management. Unauthorised disposal of the
product by the user entails the application of the administrative sanctions provided for in the laws
transposing Directive 2012/19/EC of the member state or country where the product is disposed of.
he
Nebuliser and accessories
py,
To be disposed of as general waste after a sanitisation cycle.
s.
Packaging
re-
ne
20
Product box
th.
PAP
Heat-shrinkable nebuliser film and
05
accessories
PP
MC
ed,
NOTIFICATION OF SERIOUS EVENTS. Please report any serious incidents in connection with this
ns.
device to the manufacturer and the competent authority of the Member State in which you reside.
nd
An event is considered serious if it causes or may cause, directly or indirectly, death or an unforeseen
of
serious deterioration in a person's state of health.
of
SYMBOLS ON DEVICE OR PACKAGING
Unique device
ff
identifier
Type BF applied part
Attention
Medical device
n
Function switch off
Function switch on
n.
Protection rating of the envelope: IP21. (Protected against solid bodies larger than 12 mm. Protected against
IP21
access with a finger; Protected against vertically falling drops of water).
u
04
LDPE
Serial number of the
device
Production date
Phthalate- and
bisphenol-free
Temperature limits
Before use: Caution check instructions for use
Medical CE marking ref. regulation 2017/745 EU and subsequent
updates
13
Product packaging bag and Tube pack-
aging bag
Class II device
Batch Code
See instructions
for use
Moisture limits
Manufacturer
Alternating current
Model number
Atmospheric pressure
limits