Parkside Performance PBSPA 12 E4 Bedienungsanleitung Und Originalbetriebsanleitung Seite 19

˜ Attaching/removing the
accessory tool
CAUTION! Risk of injury!
m
Accessory tools can be sharp
and may become hot during use.
Always wear protective gloves
when handling accessory tools!
WARNING!
m
Always switch the product off,
remove the battery pack
and let the product cool down
before making any adjustments!
CAUTION! Risk of injury!
m
Keep your hands away from the
u
accessory tool when the product is
in operation.
After the product has been
u
switched off, the accessory tool
continues moving for some time.
Do not touch the accessory tool
and do not attempt to brake it.
(Fig. , I)
This product is equipped with an
automatic spindle lock to open or close
the chuck with the chuck ring
1 ] [
1. Open the chuck
ring in a counter-clockwise
[ 2 ]
direction.
2. Insert a suitable accessory tool
(screw bit , wood drill bit
[ ]
SS drill bit ) into the chuck
[ ]
deep as required.
3. Close the chuck
accessory tool in position.
Turn the chuck ring
clockwise direction.
[ ]
.
2 ] [
: Turn the chuck
[ 1 ]
, or
[ ]
as
1 ] [
: Hold the
[ 1 ]
in a
[ 2 ]
˜ Removing/installing the
chuck
NOTE
If you want to use the bit
u
adaptor (see "Using the bit
[ ]
adaptor ), you must rst remove the
chuck .
[ 1 ]
(Fig. H)
Removing the chuck
1. old the chuck
2. Pull the lock ring
unlock the chuck
3. Pull the chuck
[ 1 ]
adaptor .
[ ]
Installing the chuck
NOTE
If the chuck
u 1 ] [
adaptor do not properly engage,
[ ]
the lock ring
[ 3 ]
to its initial position. In this case,
rotate the chuck clockwise or
counter-clockwise until the lock ring
returns back to its initial position
with a click sound.
1. Pull the lock ring
2. Align the hole of the chuck
the bit adaptor
[
3. Push the chuck
adaptor as far as it will go.
[ ]
4. Release the lock ring
chuck .
[ 1 ]
˜ Using the bit adaptor
NOTE
If you want to use the bit
u
adaptor , you must rst remove
[ ]
the chuck (see "Removing/
[ 1 ]
installing the chuck").
from the front.
1 ] [
backwards to
3 ] [
.
1 ] [
off the bit
and the bit
cannot return back
backwards.
3 ] [
with
[ 1 ]
.
]
onto the bit
[ 1 ]
to secure the
3 ] [
GB 17