DAZE Dazebox Home Installationsanleitung Seite 8

EN
03.2 - Light icons
Icons Status
1
Internet
connectivity
2
Vehicle
3
Energy
management
4
Charger lock
5
Scheduled
programming
6
Self-consumption
04 - Safety information
Read these instructions carefully before using Dazebox.
Deactivate the power supply by acting on the upstream switch before intervening on Dazebox for cleaning
operations.
Installation, maintenance and decommissioning must be carried out only by qualified personnel.
Do not attempt to touch the contacts of the charging connector, do not insert any object into it.
Dazebox components must not be modified. Do not remove any labels, codes or nameplates.
Children, or people who may not be able to assess the risks related to the use of Dazebox, should not use the
device as they may incur serious injuries.
Incorrect installation or repair may cause hazards for the user. If the Dazebox bears mechanical damage, it must
be replaced immediately by qualified personnel. In case of damage or malfunction contact technical support by
opening a ticket from the website or from the support section on the Daze app.
When the Dxazebox Home T version is not in use, ensure that the cable is not left on the ground or in a position
that may obstruct people. Prohibition of the use of additional adapters and extensions to the cable for the
connection between EV and EVSE.
8.
Description
Blinking: Device not connected
On: Device connected
Off: Connection not configured
On: Cable connected to the vehicle
Off: Cable disconnected from the vehicle
On: Power Manager configured
Off: Power Manager not configured
Blinking: Insufficient network power
On: Locked (including scheduled time)
Off: Unlocked
On: Enabled
Off: Disabled
On: Self-consumption activated
Off: Self-consumption disabled
Load Balancing
Blinking: Device not connected
On: Device connected
Off: Connection not configured
On: Cable connected to the vehicle
Off: Cable disconnected from the vehicle
Off: Slave not connected to the master
On: Slave connected to the master
Blinking: Insufficient network power
On: Default state (only on master)
On: Locked (including scheduled time)
Off: Unlocked
On: Enabled
Off: Disabled
On: Self-consumption activated
(only on master)
Off: Self-consumption disabled
(only on master)
Off: Default state (only on slave)