DAZE Dazebox Home Installationsanleitung Seite 20

EN
11 - Configuration
The initial configuration of Dazebox Home must be done through the app. The Daze app will guide the user through the
charger and energy management system setup phase. The configuration can also be performed in environments where the
smartphone lacks an internet connection, provided that, at certain stages of the setup, the phone's connection is restored,
even if temporarily moving away from the charger.
1. Download App
Download the App from the Google Play or App Store stores.
2. Associate Dazebox Home with the App
After successfully completing the steps in the previous chapters of this guide, power up the charger and verify the startup
of the LEDs on the display. Launch the app downloaded on your smartphone and create an account. Once logged in, you will
be able to initiate the setup procedure for Dazebox Home. During the association phase, the Serial Number and PUK will be
required. You can find these details on the card provided inside the packaging. Please store this card carefully.
12 - RFID card configuration
In all Dazebox Home models are equipped with an RFID reader that allows a user with a card to authenticate himself and start
charging on a locked charger. Enabling the cards requires a stable internet connection of the charger, after which the cards
can also be used in offline mode.
A card is enabled via the App by associating the card serial number (fig. C) with the network in which the charger is plugged.
cator is inserted. Once the association with the network has been made, it will be possible to associate the card with a user
on the network.
Note: Within the same network, a card can only be associated with one user.
To authorize charging via an RFID card on a locked charger, approach the card to the designated symbol on the Dazebox Home
display (fig. D) until a short beep is emitted. A second signal after a few seconds will indicate whether the authorization was
successful (single beep) or failed (double beep).
20.
C
xxxx xxxx
D
kW