Werbung
Original instructions
READ ALL INSTRUCTIONS!
READ OPERATOR'S MANUAL
WARNING:
To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves,
eliminate any danger. The instructions and warnings they
give are no substitutes for proper accident prevention
measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
WARNING, OR CAUTION. May be used in conjunction with
other symbols or pictographs.
The operation of any power tools can
result in foreign objects being thrown into your
eyes, which can result in severe eye damage.
Before beginning power tool operation, always
wear safety goggles or safety glasses with side
shields and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with
side shields.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate it.
Indicates DANGER,
XX
Indicates a potential personal
Safety Alert
injury hazard.
To reduce the risk of injury,
Read
user must read and understand
Operator's
operator's manual before using
Manual
this product.
Always wear ear protection and
Wear Ear
safety goggles or safety glasses
and Eye
with side shields and a full
Protection
face shield when operating this
product.
20cm
Blade length
Blade length of edger
of edger
Keep
The distance between the
15m
Bystanders
machine and bystanders shall be
Away
at least 15 m.
Direction of
Indicates the direction of the
Edger Blade
edger blade rotation.
Rotation
Edger debris can affect
Thrown
stable footing. Use extreme care when
Objects
walking in edging area.
Wear Safety
Wear non-slip safety footwear
Footwear
when using this equipment.
Rotating
Do not put hands or feet near or
Cutting Blade
under rotating parts.
Keep
To prevent electrocution, do not
sufficient
operate within 15m of overhead
distance
electrical lines. Contact with or
away from
use near power lines may cause
electrical
serious injury or electric shock
power lines
resulting in death.
This product is in
CE
accordance with applicable EC
directives.
This product is in accordance
UKCA
with applicable UK legislation.
Waste electrical products
should not be disposed of with
WEEE
household waste. Take to an
authorized recycler.
Guaranteed sound power
level. Noise emission to the
Noise
environment according to the
European community's Directive.
EDGER ATTACHMENT — EA0800
EN
5
Werbung
