TROUBLE SHOOTING
CAUSE
PROBLEM
◾
The battery pack is not attached to the
power head.
◾
No electrical contact between the power
head and the battery pack.
Motor fails to start.
◾
The battery pack is depleted.
◾
The lock-off button and trigger are not
depressed simultaneously.
◾
The motor is overloaded.
◾
The battery pack or the power head is
too hot.
Power head stops
during operation.
◾
The battery pack is disconnected from
the tool.
◾
The battery pack is depleted.
◾
Grass or soil edged is too wet.
◾
Blade guard is clogged.
Uneven edge
WARRANTY
EGO WARRANTY POLICY
Please visit the website egopowerplus.eu for full terms and conditions of the EGO Warranty policy.
SOLUTION
◾
Attach the battery pack to the power
head.
◾
Remove the battery, check contacts
and reinstall the battery pack until it
snaps into place.
◾
Charge the battery pack with EGO
chargers listed in this manual.
◾
Press down the lock-off button and
hold it, then depress the trigger to turn
on the power head.
◾
The motor will recover when the load
is removed. For continuous working,
decrease the load of the power head.
◾
Allow the battery pack or power head
to cool until the temperature drops
below 67°C.
◾
Re-install the battery pack.
◾
Charge the battery pack with EGO
chargers listed in this manual.
◾
Avoid edging in wet soil or wet grass.
◾
Stop the motor, remove the battery
pack, and remove debris from the
blade guard.
EDGER ATTACHMENT — EA0800
EN
13