Therabody SmartGoogles Bedienungsanleitung Seite 13

8. Troubleshooting Guide
SCENARIO SYMPTOM
Battery indicator
LED doesn't turn on
Device does not
turn on.
Power LED can
light on but the
device not work
POTENTIAL CAUSES
Battery ran out or no battery power
in the device
Charging USB-C cable is damaged
Internal malfunction
The device ran out of battery or
there is no battery power in the
device
POTENTIAL SOLUTIONS
Connect the USB-C cable (included in box) to the device and plug in the
other end to a power outlet. Verify that the device is charging by checking
proper connection between the power adapter, the USB-C cable, and the
USB-C port on the device. Battery LED indicator will display the level.
Ensure you are using the USB-C to USB-C cable provided, or one from a
certified manufacturer.
If the device is not charging after verifying all the above, the power adapter
or device may be damaged. Contact Therabody for further assistance. Visit
https://www.therabody.com/us/en-us/support/support.html for the available
contact methods.
Charge the device and try again
If the issue still persists, Contact Therabody for further assistance. Visit
https://www.therabody.com/us/en-us/support/support.html for the available
contact methods.
EN
13