Parkside Performance PBSPA 12 E4 Bedienungsanleitung Und Originalbetriebsanleitung Seite 39

m ATTENTION! This charger
is only designed for
charging the battery pack
types:
battery pack
PAPK 12 A3 2.0 Ah 3 cells
PAPK 12 B3 4.0 Ah 6 cells
PAPK 12 C1 2.5 Ah 3 cells
PAPK 12 D1 5.0 Ah 6 cells
Suitable battery packs
and chargers
Battery
pack:
Charger:
Customers can obtain
compatible replacement
batteries and chargers via
www.optimex-shop.com.
˜ Before first use
˜ Accessories
To operate this product safely and
correctly, the following accessories, i.e.
tools and accessory tools, are necessary:
Suitable drill bits
o
Suitable driver bits
o
Cross tip screwdriver
o
Cooling lubricant (cutting oil) suitable
o
for drilling in metal
Suitable personal protective
o
equipment
12 V
X 12 V Team
X 12 V Team
Accessories and accessory tools are
available through your authorised dealer.
When buying always consider the
technical requirements of this product
(see "Technical data").
If you are not certain, ask a qualified
specialist and get advice from your
trusted dealer.
NOTE
This instruction manual contains
u
information and suggestions for
several accessory tools and their
uses. The accessory tools depicted
are not included in the shipment
(see "Scope of delivery"), but
are meant to indicate additional
possibilities for using this product.
WARNING!
m
Do not use accessories not
u
recommended by Parkside. This
may result in electric shock or fire.
˜ Removing/attaching the
battery pack
CAUTION! Risk of injury!
m
Always lock the on/off switch
u
avoid accidental starting by moving
the rotation direction switch
the centre position (Lock) before
removing/attaching the battery
pack .
[ ]
(Fig. B)
Removing the battery pack
1. Press the release button
battery pack
[
2. Pull the battery pack
the grip handle
to
[ 8 ]
into
[ 6 ]
on the
[ ]
.
]
away from
[ ]
.
[ 7 ]
GB/IE 37