Scheppach AB1900x Originalbetriebsanleitung Seite 29

17. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your product failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault Possible cause
Mains fuse blown
Extension lead defective
Engine does not
Connection to the motor or switch not OK
start
Engine or switch faulty
Carbon brushes defective
Cross section of the extension cable
insufficient
Motor not supplying
power, fuse tripping
Overload
Electrical system defect
Remedy
Check mains fuse
Replace extension lead
Have this checked by an electrician
Have this checked by an electrician
Have this checked by an electrician
see Electrical connection
Check tool
Have this checked by an electrician
www.scheppach.com GB | 29