Inserting The Tool Into The Pipe; Insertion Depth And Peeling Zone - Rothenberger Roscraper 315 Bedienungsanleitung

The Pipe End Peeler is in its basic position.
6.2

Inserting the tool into the pipe

ROSCRAPER 315:
 Turn the handle (1) to open the scissor mechanism (2).
 Open the scissor mechanism only so far, that you can still insert the tool into the pipe with-
out any problems.
ROSCRAPER 400:
 If the tool is in the basic position described above, turn the handle (1) to open the scissor
mechanism (2). This can only be opened and closed if the pilot arm is in the recess of the
catch holder.
 Open the scissor mechanism only so far, that you can still insert the tool into the pipe with-
out any problems.
6.3

Insertion depth and peeling zone

The PE-X versions of the Pipe End Peelers 90-315 mm and 180-400 mm offer the possibility to
peel coupler branches such as T-pieces or saddle outlets due to their support rails. The insertion
depth can be chosen freely due to the scissor mechanism with rails.
ENGLISH 25