Secret Lab MAGNUS Montageanleitung Und Benutzerhandbuch Seite 4

IMPORTANT SAFETY INFORMATION
This user manual contains important safety regulations. Any non-conforming use may result in
personal injury or mechanical damage. Please read this user manual carefully before use as it
provides key information about safety, use, assembly and maintenance of the Secretlab MAGNUS
Heavy Duty Monitor Arm.
Ensure that you have received all parts according to the part checklist prior to installation. If any
parts are missing or faulty, contact the Secretlab support team for replacements. The Secretlab
MAGNUS Heavy Duty Monitor Arm contains small items that could be a choking hazard if swallowed.
Keep these items away from children and pets. Do not overtighten the screws during installation.
Place the monitor arm away from corrosive gas, water and dusty environment. Alteration or modding
of any factory components outlined in the part checklist will automatically void your warranty.
This monitor arm is not intended for use
by children without adult supervision.
Ensure that the mounting surface will
safely support the combined weight of
the arm and its attached components.
This product is intended for indoor use
only. Using this product outdoors could
lead to product failure.
AFTERCARE GUIDE
Do not use your monitor arm outside of it's intended usage.
Improper use can damage your monitor arm or even cause
injuries. To ensure your safety, always follow the given
instructions.
Clean with damp cloth.
Use a solution of mild soap and warm water applied to a damp
cloth to remove dirt and impurities. Dry with a clean cloth
immediately afterwards.
Do not abuse it
Even the toughest of monitor arms will not be able to stand up to
rough and inappropriate use. Keep your monitor arm away from
impacts, drops and sharp objects.
Do not use abrasive scrubbers or harsh cleaners
Avoid abrasive cleaners as they can damage the powder-coated
finish of your monitor arm.
Avoid exposure to direct or prolonged sunlight
Do not expose your monitor arm to direct and prolonged periods
of sunlight or heat sources as fading and cracking of the
surface finish may occur.
Do not exceed the maximum load capacity
stated for the monitor arm, 8 - 16 kg (17.6 - 35.2 lb).
Do not remove your monitor screen
unless the arm is fully unloaded.
Dismounting instructions are provided.
The cable sheaths contain strong magnets.
This can be harmful to pacemaker wearers.
TECHNICAL SPECIFICATIONS
Weight Capacity
Table Top Compatibility
Vesa Mount Compatibility
Arm Tilt Range
Screen Swivel Range
Screen Rotational Range
Height Adjustment Range
Extended Arm Reach
8 - 16 kg (17.6 - 35.2 lb)
10 - 50 mm (0.4 - 1.9")
75 x 75 mm / 100 x 100 mm
+20°/-20°
+90°/-90°
+90°/-90°
265 mm (10.4")
515.7 mm (20.3")