Secret Lab MAGNUS Montageanleitung Und Benutzerhandbuch Seite 3

STAGE C: CABLE MANAGEMENT
01
Before you begin routing your cables, fully extend the arm
to ensure easy arm rotation when fully assembled.
02
Fully connect your cables from your power source or computer
through the Cable Channel on the bottom arm to your monitor.
03
Slot the loose cables under both arms into their respective
Magnetic Cable Sheaths and attach them to the base of each arm.
Note: Leave some slack in the cables to ensure that your monitor
rotates without any obstruction.
STAGE D: HANDLE INSTALLATION
01
Insert each handle into the slots located on the VESA mount.
You should feel a click when the handles are fully inserted.
Note: Both handles should be angling away from your monitor screen
02
Tighten the pre-installed hex screws on the handle to fasten it
securely to the VESA mount.
Maximum Cable
Diameter: 8.5mm
USE & LIABILITY
The Secretlab MAGNUS Heavy Duty Monitor Arm
is designed for indoor use and dry work areas only.
Under no circumstances does the manufacturer accept
warranty claims or liability claims for damages caused
from improper use or handling of the monitor arm.
For warranty terms and service or any other queries,
scan the QR code or visit our website secretlab.co/support.
OTHER LANGUAGES
To view this manual in the following languages, please scan
the QR Code to the left.
Pour consulter ce manuel dans les langues suivantes, veuillez
scanner le QR code à gauche.
Um dieses Handbuch in den folgenden Sprachen anzuzeigen,
scannen Sie bitte den QR-Code auf der linken Seite.
Scan de QR-code naar links om deze handleiding in de
volgende talen te bekijken.
이 설명서를 다음 언어로 보시려면 왼쪽에 있는 QR 코드를 스캔하세요.
Untuk melihat manual ini dalam bahasa berikut, sila imbas
Kod QR ke kiri.
01
02
03