Fox TRANSFER NEO Bedienungsanleitung Seite 14

LED REFERENCE CHARTS
CONTROLLER LED REFERENCE
Event
Battery has been inserted into
controller
Power off
Enter lever pairing mode/after pressing
pairing button
Remote lever pairing scan/waiting for
confirmation
Remote lever pairing success
Remote lever pairing failure
BLE connected
BLE disconnected
Valve/motor fault
Remote lever low battery
Controller low battery
Valve open from pairing button
Valve opened or closed from remote
lever
Blink Sequence
LEDs display battery charge level:
1 yellow blink/10-25%;
1 red blink/<10%
System goes to sleep after 5 minutes (no LED indication)
1 green blink every 0.75 seconds
1 green blink every 0.5 seconds for 5 seconds
1 red blink every 0.5 seconds for 5 seconds
2 yellow blinks, then a red blink every second
3 yellow blinks every 5 seconds
2 red blinks every 5 seconds (also indicated through App)
Solid white LED
LEDs display battery charge level:
1 amber blink/10-20%;
1 red blink/<10%
14
Solid green
2 blue blinks
3 blue blinks