Fox TRANSFER NEO Bedienungsanleitung Seite 11

1X REMOTE LEVER INSTALLATION (I-SPEC EV)
1. Install and position the brake lever according to
the brake manufacturer's instructions. Make sure
to install the supplied nut into the band clamp of
the brake lever during this step.
2. Install the remote lever and adapter to the brake
lever clamp using the supplied 22 mm long
mounting bolt. (Note: the 35 mm long bolt is
for the 22.2 mm clamp mount.). Tighten both
bolts to 17.7 in-lb (2.0 N•m). Test the range of
motion for each remote lever, brake lever, and
shifter control lever to make sure there is proper
clearance between them.
11
17.7 in-lb (2.0 N•m)