1mm.
Ÿ presence of cracks particularly on the rotation axis of the fate [11].
Any product or component showing any defect or wear, or if in doubt, should be withdrawn from service immediately. Each
product in the safety system can be damaged during a fall and must be always inspected before use it again. Do not
continue to use a product after a major fall because a damage may have occurred, even no external signs are visible.
LIFETIME
Textile part: The lifetime of the product is 5 years from the date the product is first used and (taking storage into
consideration) in any case cannot exceed the end of the seventh year from manufacturing (i.e. manufacture year 2017,
lifetime until end of 2024, or 10 year from the date of first use, whichever comes first). The lifetime is understood to be in
the absence of causes which would place the product out of order with the condition that periodic inspections are carried
out at least once every 6 months starting from the date the product is first used and the results are recorded on the life
sheet of the product.
Carabiners: The lifetime of the product is unlimited, unless any defect appears and provided that periodic inspections are
made at least once every 12 months from the date the product is first used and the results are recorded in the life sheet of
the product.
Textile part and carabiners: The following factors can reduce the lifetime of the product: intense use, damage to
components of the product, contact with chemical substances, high temperatures, tears and abrasions, violent impacts,
failure to maintain as recommended. When suspect that the product is no more safety and reliable, please contact
C.A.M.P. spa or the distributor.
TRANSPORTATION Protect the product from risks such as those detailed above.
19