Programming The Control Valve - Aqmos R2D2-32 Betriebsanleitung

11. Programming the control valve in "Volume
not taken into account" mode (UNITS METRIC)
Press the " " button for 3 seconds to release the button lock (SCREEN LOCKED). Press the " " but-
ton to access the menu.
LANGUAGE" appears.
Press the " " button. The display starts to flash.
Use the " " and " " buttons to select "ENGLISH" mode.
Save this entry with the " " button.
Press the " " button to go to the next item.
"UNITS METRIC" or "REGION US" appears.
Press the " " button. The display starts to flash.
Use the " " and " " buttons to select "UNITS METRIC" mode.
Save this entry with the " " button.
Press the " " button to go to the next item.
One of the following modes is displayed: "Volume delayed", "Volume not taken into account", "Time
control", "Volume immediate".
Press the " " button. The display starts to flash.
Use the " " and " " buttons to select "Volume not taken into account".
Save the entry with the " " button.
Press the " " button to go to the next item.
You will see: "Time" (current time).
Press the " " button. The display starts to flash.
Use the " " and " " buttons to select the hour.
Save the entry with the " " button.
The setting for the minute now flashes.
Use the buttons " " and " " to select the minute.
Save this entry with the " " button.
Press the " " button to go to the next item.
You will see: "Regen.time".
Press the " " button. The display starts to flash.
Use the " " and " " buttons to select the hour.
(We recommend "3")
Save this entry with the " " button.
The setting for the minutes now flashes.
Use the " " and " " buttons to select the minutes.
(We recommend "0")
Save this entry with the " " button.
40