Aqmos R2D2-32 Betriebsanleitung Seite 43

Press the " " button to go to the next item.
You will see: "Regen.time".
Press the " " button. The display starts to flash.
Use the " " and " " buttons to select the days.
(We recommend "07")
Save this entry with the " " button.
Press the " " button to go to the next item.
You will be shown "Capacity".
Press the " " button. The display starts to flash.
Use the buttons " " and " " to select the capacity in tonnes (= 1000 litres).
Enter the volume value from the table on page 11 here.
Save this entry with the " " button.
The setting for the capacity in litres now flashes.
Use the buttons " " and " " to select the capacity in litres.
Enter the decimal point value from the table on page 11 here.
Save this entry with the " " button.
Press the " " button to go to the next item.
You will see: "Backwash".
Press the " " button. The display starts to flash.
Use the buttons " " and " " to select the appropriate time in minutes for your system:
R2D2-32: 01 min.
R2D2-48: 01 min.
R2D2-72: 01 min.
Save this entry with the " " button.
Press the " " button to go to the next item.
You will see: "Salinisation".
Press the " " button. The display starts to flash.
Use the buttons " " and " " to select the appropriate time in minutes for your system:
R2D2-32: 28 min.
R2D2-48: 35 min.
R2D2-72: 40 min.
Save this entry with the " " button.
You will see: "Quick rinse".
Press the " " button. The display starts to flash.
Use the buttons " " and " " to select the appropriate time in minutes for your system:
R2D2-32: 02 min.
R2D2-48: 02 min.
R2D2-72: 03 min.
41