Aqmos R2D2-32 Betriebsanleitung Seite 39

10. Adjusting the settings on the control valve
The control valve is controlled by easy-to-operate electronics via an LCD display. In normal operation,
the current time and the remaining capacity until the next regeneration are displayed.
The capacity is displayed in T (tonnes). One tonne corresponds to 1000 litres or 1 m³ of water
We have already preset the control valve to a water hardness of 15 °dH to be removed and to the
"Volume mode with forced regeneration" mode (metre override). The water hardness to be removed
must be adapted to your existing hardness. The operating mode should not be changed in order to
prevent contamination.
All the following values are already preset for you!!!
Parameters
1 Language
2 REGION
REGENERATION
3
MODE
Options
ENGLISH (among oth-
ers)
UNITS METRIC
EUR 0
Time control
Volume immediately
Description
Menu languages (Italiano, Svenska, Ne-
derlands, English, Espanol, Turkish, Polski,
Francais, Russian, Cestina, Romania)
Unit selection
Gallons (US) or tonnes (1 tonne = 1000 l)
In this mode, the system regenerates af-
ter a fixed number of programmed days
at a fixed time. The amount of water con-
sumed during this period is not taken into
account.
Abbreviation in the display: CC (time con-
trol)
In this mode, the system regenerates af-
ter reaching a fixed programmed volume
of water. Once the set volume has been
reached, regeneration takes place imme-
diately.
Abbreviation in the display: MI (volume
so- continued)
37