Programming The Control Valve; Calculating The Softening Capacity - Aqmos R2D2-32 Betriebsanleitung Und Programmieranleitung

Setting the Softening Capacity
The capacity must be calculated and entered based on the size of the system (amount of
softening resin) and the water hardness. Refer to Chapter 12.
Checking All Parameters
Ensure that all parameters match the size of the system.

11. Programming the Control Valve

Press the button " " for 3 seconds to unlock the keypad (SCREEN LOCKED).
Press the button " " to enter the menu.
"LANGUAGE" will appear.
Press the button " ". The display will start blinking.
Use the buttons "
Save this entry by pressing the button " ".
Proceed to the next step by pressing the " " button.
"REGION" will appear.
Press the button " ". The display will start blinking.
buttons "
Use the buttons " Use the
Save this entry by pressing the button " ".
Proceed to the next step by pressing the "
"REGENERATION MODE" will appear.
Press the button " ". The display will start blinking.
Use the buttons " Use the buttons "
Save this entry by pressing the button " ".
Proceed to the next step by pressing the "
"TIME" will appear.
Press the button " ". The display will start blinking.
buttons "
Use the buttons " Use the
Save this entry by pressing the button " ".
Proceed to the next step by pressing the "
"REG. TIME" will appear.
Press the button " ". The display will start blinking.
Use the buttons " Use the buttons "
Save this entry by pressing the button " ".
Proceed to the next step by pressing the "
" to select the mode "ENGLISH".
" to select "METRIC".
" to select "METER OVERRIDE".
" to select the current time.
" to select 02:00.
" button.
" button.
" button.
" button.
10