Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Safety Precautions
This product complies with the requirements of the following European Community Directives:
2004/108/EC (Electromagnetic Compatibility) and 2006/95/EC (Low Voltage) as amended by
2004/22/EC (CE-Marking); pollution degree 2.
To ensure safe operation of the equipment and eliminate the danger of serious injury due to short-
circuits (arcing), the following safety precautions must be observed.
Damages resulting from failure to observe these safety precautions are exempt from any legal
claims whatever.
*
Do not use this instrument for high-energy industrial installation measurement.
*
Do not exceed the maximum permissible input ratings (danger of serious injury and/or
destruction of the equipment).
*
Check test leads and probes for faulty insulation or bare wires before connection to the
equipment.
*
To avoid electric shock, do not operate this product in wet or damp conditions. Conduct
measuring works only in dry clothing and rubber shoes, i. e. on isolating mats.
*
Comply with the warning labels and other info on the equipment.
*
Do not subject the equipment to direct sunlight or extreme temperatures, humidity or
dampness.
*
Do not subject the equipment to shocks or strong vibrations.
*
Do not operate the equipment near strong magnetic fields (motors, transformers etc.).
*
Keep hot soldering irons or guns away from the equipment.
*
Allow the equipment to stabilize at room temperature before taking up measurement (important
for exact measurements).
*
Periodically wipe the cabinet with a damp cloth and mid detergent. Do not use abrasives or
solvents.
*
The instrument is suitable for indoor use only
*
Do not operate the meter before the cabinet has been closed and screwed safely as terminal
can carry voltage.
*
Do not store the meter in a place of explosive, inflammable substances.
*
Do not modify the equipment in any way
*
Do not place the equipment face-down on any table or work bench to prevent damaging the
controls at the front.
*
Opening the equipment and service – and repair work must only be performed by qualified
service personnel
*
Measuring instruments don't belong to children hands.
-7-
Werbung
Inhaltsverzeichnis
