Installation Preparation - Kuppersberg Rbn 1760 Technischer Pass

ENGLISH
INSTALL ATION PREPARATION
This appliance must never be in-
stalled close to heat sources, e.g. heating
elements, cookers or in damp places.
 To ensure the appliance is level,
you should use the height adjustable feet
at the front of the appliance.
 The cooling system at the rear of
the appliance must not touch the rear
wall.
 The appliance must be installed
with adequate ventilation. Ensure that
TECHNICAL PASSPORT
Integrated fridge freezer
there is clearance above the appliance
to allow air to escape and that there is
space between the rear of the appliance
and the wall.
 Adequate ventilation should be
provided in the base of the unit to aid
airflow. Recommended cut out of 300mm
x 300mm.
Important
Please follow the instructions to in-
stall this unit.
The diagrams show the ventilation re-
quirements for your appliance. Failure to
provide adequate ventilation can lead to
increased running costs and premature
failure and may invalidate The warranty
provided with the appliance.
33