Setting Blue Screen; Setting Sleep Timer; Setting Current Time/Turn Off Timer/Turn On Time - Xoro HTL 2711w Benutzerhandbuch

Setting WSS
1. Press MENU to display the menu main page.
2. Press VOL+/ repeatedly to display
q
3. Press CH repeatedly to select
4. Press VOL+ or ENTER
p q
5. Press CH / to select
6. Press ENTER to confirm and press
Note
l
If the [WSS] (Wide screen signaling) function is changed from OFF to ON, the
unit can identify the WSS signal.

Setting Blue Screen

1. Press MENU to display the menu main page.
2. Press VOL+/ repeatedly to display
q
3. Press CH repeatedly to select
4. Press VOL+ or ENTER
p q
5. Press CH / to select
6. Press ENTER to confirm and press
l
If the [Blue Screen] is set to [On], the unit displays a blue background when
there is no input signal.
l
In TV mode, when there is no input signal for approx. 5 minutes, the TV set auto
goes to STANDBY mode.

Setting Sleep Timer

You can quickly set the sleep timer by using the
With every press of this button the sleep time changes as follows:
Cancel 15 Min. 30 Min.
Setting Current Time / Turn Off Timer / Turn On Timer
With the unit working, press
allows you to set Current Time
p q
and CH / to adjust.
With the Current Time menu on the screen, press
Off Time setting menu, which allows you to set
VOL+/ to toggle hour or minute and
With the Turn Off Time menu on the screen, press
On Time setting menu, which allows you to set
VOL+/ to toggle hour or minute and
Note:
l If you want to cancel the Off Timer or On Timer function, please set the [ Turn Off Time] or [ Turn On Time] to [00:00].
108
SETTING SYSTEM
Option menu page.
WSS item.
to access the sub menu.
ON or OFF .
MENU repeatedly to exit.
Option menu page.
Blue Screen item.
to access the sub menu.
On or Off .
MENU repeatedly to exit.
SLP button on the remote control.
45 Min. 60 Min.
TIMER to display Current Time
. You may use VOL+/
TIMER
Turn Off Time
p q
CH / to adjust.
TIMER
Turn On Time
p q
CH / to adjust.
90 Min. 120 Min.
setting menu, which
to toggle hour or minute
again to display Turn
. You may use
again to display Turn
. You may use