Screen Setting - Connecting Additional Devices; Connecting An External Tv - Xoro PTL 1015 Bedienungsanleitung

Screen setting - Connecting additional devices

While the built-in screen is active, the SCREEN key can be
used to display the screen settings menu.
BRIGHTNESS/CONTRAST/COLOUR
Set the values according to your wishes.
LED-BL
This setting affects the brightness of the LED illumination of
the screen and the power consumption or battery life.
Setting
ECO
NORMAL
OUTDOOR
LANGUAGE
Changes the language for the screen settings menu.
RESET
Resets the screen settings to the factory defaults.

Connecting an external TV

You can connect the portable TV to a larger TV using an HDMI or AV cable.
HDMI output
Connect the HDMI output (see page 8) of the portable TV to an HDMI input of another TV. Refer
to the manual of your TV to find out how to access the HDMI input. An HDMI cable is required for the
connection. This is not included with the television. The built-in screen and speakers of the portable TV
are automatically turned off when an HDMI connection is used.
Note:
See page 10 and 21 to learn how to change the HDMI resolution.
AV output
Connect the AV OUT output (see page 8) of the portable TV to an AV input of another TV. Refer to
the manual of your TV to find out how to access the AV input.
Note:
• See page 20 to adjust the aspect ratio to the connected TV.
• You can turn off the speaker built into the portable TV. See page 23.
• The AV cable supplied with the portable TV is required for the connection.
Reduced screen brightness. Low energy consumption and long
battery life.
Medium brightness.
Maximum brightness, e.g. when using the TV outdoors. The
battery life is shorter in this mode.
EN 16
Meaning