Identification Of Controls; Main Unit - Xoro HTL 2711w Benutzerhandbuch

Removing or installing the Back Cover
Press the PUSH button (only for HTL 3211w model)
Pull out
the Cover carefully
When you finish connecting, aim the Insertion toward the Locating groove, then carefully push the Cover until the Cover locks in place
with a click.

Main unit

Power On/Off
Power Indicator
A yellow indicator lights when the power is
on and a red indicator lights when in the
standby mode.
Remote Sensor
1. POWER
Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.
2. SOURCE
To access signal source select menu
In OSD Menu, press this button to confirm your setting or operation
3. MENU
Press this button to access the Menu main page
4. VOL+/
Press the VOL+ or VOL
In OSD Menu, press these buttons to adjust the value or setting of each item
5. CH+/
Press these two buttons to directly change the TV channel;
In OSD Menu, press these buttons to choose the OSD items
Note:
l Functions of
VOL+/ CH+/ MENU SOURCE ,
provides a description based on operating functions with the remote control.
88
IDENTIFICATION
OF CONTROLS
Pull out
the Cover carefully
button to directly increase or decrease the sound volume level;
, , and
Cover
Insertion
CH+
CH
VOL+
VOL
MENU
SOURCE
POWER are also provided to the remote control. This operation manual
Remove the Cover
Insertion
Channel Up Down /
Volume Up Down /
Menu
Select Input Signal
Power On/Standby
Cover