Smoothing The Picture; Loading Default Values; Advanced Adjustment For Image Position - Xoro HTL 2711w Benutzerhandbuch

Smoothing the Picture

1. Press MENU to display the menu main page.
2. Press VOL+/ repeatedly to display
q
3. Press CH repeatedly to select
4. Press VOL+ or ENTER to access the sub menu.
p q
5. Press CH / to select
6. Press ENTER to confirm and press
When the screen displays a picture with a bevel edge, you may find a sawtooth
picture on the bevel edge. This function helps to improve the picture quality by
smoothing the sawtooth picture.
l
Both on Smooth picture in the horizontal and vertical directions;
l
Only Ver. on Smooth picture in the vertical direction;
l
Only Hor. on Smooth picture in the horizontal direction;
l
Both off Turn off this function.

Loading Default Values

1. Press MENU to display the menu main page.
2. Press VOL+/ repeatedly to display
CH q
3. Press repeatedly to select
4. Press ENTER to confirm and press

Advanced Adjustment for Image Position

It is unnecessary to perform advanced adjustment in normal case. In most cases,
the [Auto Sync] function is able to adjust and rectify the picture automatically. But,
sometimes, if you find that the image position can not be correctly displayed even
if you have adjusted the [H Position], [V Position] or [Auto Sync] item, please try to
perform advanced adjustment for the image position.
1. Press MENU to display the menu main page.
2. Press VOL+/ repeatedly to display
q
3. Press CH repeatedly to select
4. Press VOL+ or ENTER to access the sub menu.
p q
5. Press CH / to select
6. Press VOL+/ to adjust the image position.
7. Press ENTER to confirm and press
112
ADJUSTMENT
IN D SUB/DVI MODE
Screen menu page.
Smoothing Mode
Both on Only Ver. on Only Hor. on , ,
MENU repeatedly to exit.
Screen menu page.
Default item.
MENU repeatedly to exit.
Screen menu page.
Advanced item.
H Position or V Position item.
MENU repeatedly to exit.
item.
or Both off .