Connect A Vcr - Xoro HTL 2711w Benutzerhandbuch

Connect a VCR

How to connect:
Connect the Scart Cable between the unit and the VCR.
To play VCR:
1. Turn on your LCD TV , press
p q
2. Press CH / to select
3. Turn on your VCR , insert a videotape and press the Play button.
Specification of SCART 2 interface
1 Audio output B (right)
2 Audio input B (right)
3 Audio output A (left)
4 Ground (audio)
5 Ground
6 Audio input A (left)
7
8 Function select (AV control)
Note:
l
The unit receives CVBS (VIDEO)
l
When receiving Y/C signal, you need to select
Therefore, if you find that the color is not properly displayed, please try to select
CONNECTIONS
RF
S-VIDEO
R
AUDIO
L/MONO
VIDEO
SOURCE button on the remote control.
SCART 2 AV and press ENTER
9 Ground
10 Comms data 2
11
12 Comms data 1
13 Ground (chrominance)
14 Ground (blanking)
15 Chrominance input
16
signal and Y/C (S VIDEO)
SCART 2 Y/C
SCART Cable
21 pin Euro SCART
connector
to confirm.
signal from SCART2 interface.
instead of SCART 2 AV
SCART 2 Y/C
SCART
AV IN
L R
VIDEO AUDIO
Rear of the VCR
VCR
17 Ground (video input & output)
(luminance ground)
18
19 Video output (composite)
20 CVBS/Luminance input
21 Common ground (shield)
in the source select menu.
.
S VIDEO
93