Antenna Connection; Power Connection - Xoro HTL 2711w Benutzerhandbuch

Antenna Connection

INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may
cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Optimum reception of color requires a good signal and will generally mean that an outdoor aerial must be used. The exact type
and position of the aerial will depend upon your particular area.
Note:
l It is recommended that the 75 ohm coaxial cable be used to eliminate interference and noise which may occur due to
radio wave conditions.
l The aerial cable should not be bundled with the power cord and the like.

Power Connection

AC INPUT
1. Connecting the female plug to the AC socket on the unit.
2. Connecting the male plug to the wall outlet as illustrated.
Note:
l
This product should be operated only from the type of power source indicated on the marking label.
l
Always unplug the AC cord from power outlet when not using for a long period of time.
l
This illustration is for reference only. The AC plug may be different on different models.
PREPARATIONS
bottom view
75-ohm coaxial cable (round cable)
To antenna
input terminal
300-ohm twin-lead flat feeder
AC cord
Household
power outlet
Plug into AC outlet.
87