Adjustment In D Sub/Dvi Mode; Adjusting Image Horizontal Size; Changing The Position Of Image; Fine Tune - Xoro HTL 2711w Benutzerhandbuch

Adjusting Image Horizontal Size

1. Press MENU to display the menu main page.
2. Press VOL+/ repeatedly to display
CH q
3. Press to select H Size
4. Press VOL+/ to adjust until you are satisfied.
5. Press MENU to exit.

Changing the Position of Image

After connecting the unit to your PC, adjust the position of the screen if it is not
well aligned.
1. Press MENU to display the menu main page.
2. Press VOL+/ repeatedly to display
q
3. Press CH to enter the menu and press
V Postion .
4. Press VOL+/ to adjust until the picture is well aligned.
5. Press MENU to exit.

Fine Tune

1. Press MENU to display the menu main page.
2. Press VOL+/ repeatedly to display
CH q
3. Press repeatedly to select
4. Press VOL+/ to adjust until the picture is well aligned.
5. Press MENU to exit.
You may find that images blur, depending on the clock phase of your PC's
Processor. If you experience blurring , you can obtain a clearer image by adjusting
the [Fine Tune] item.
Note:
l
The [Fine Tune] item can not be accessed in DVI mode.

Adjusting the Screen Automatically

1. Press MENU to display the menu main page.
2. Press VOL+/ repeatedly to display
q
3. Press CH repeatedly to select
4. Press ENTER to confirm and press
You may quickly adjust the screen by using the
automatically adjusts phase, clock or position, etc.
Note:
l
The [Auto Sync] item can not be accessed unless the unit is in VGA mode.
l
The Auto Adjust function only works in VGA mode.
ADJUSTMENT
IN D SUB/DVI MODE
With working in D Sub or DVI mode, this unit allows you to perform many adjustments.
Screen menu page.
item.
Screen menu page.
p q
CH or CH
Screen menu page.
Fine Tune .
Screen menu page.
Auto Sync item.
MENU repeatedly to exit.
STEREO
to select H Position or
button directly. The unit
111