Basic Operations; Changing Channels; Adjusting The Volume; Muting The Sound - Xoro HTL 2711w Benutzerhandbuch

Changing Channels

Using the Channel Buttons (
p q
Press the CH or CH to change channels.
p
When you press the CH
memorized.
You will not see channels that were skipped.
Direct Accessing Channels
Press the number buttons to go directly to a channel.
To select a one digit channel:
Input the channel number by using the
To select a two digit channel:
Press / to display and input the channel number by using the
To select a three digit channel:
Press / to display and input the channel number by using the
Note:
l
When you use the number buttons, You may directly select channels that were skipped.
Using the RETURN button
Press this button to switch between the current channel and the previous channel.

Adjusting the Volume

Using the volume buttons (VOL and VOL+)
Press the VOL +or VOL to increase or decrease the volume.

Muting the Sound

Using the MUTE button
At any time, you can temporarily turn off the sound using the
1. Press the MUTE button and the sound turns off.
2. To turn mute off, press the

Select input source signal

1. Press SOURCE to access source select menu.
p q
2. Press CH / to select a desired signal source.You may directly press
the relevant number button to select a desired signal source.
3. Press ENTER to confirm.
TV Select TV signal.
Video Select signal from Video terminal.
S Video Select signal from S Video terminal.
SCART1 Select signal from 21 PIN SCART 1 interface.
SCART2 AV Select signal from 21 PIN SCART 2 interface.
SCART2 Y/C Select SCART2 Y/C when viewing Y/C signal from 21 PIN SCART 2 interface.
YPbPr Select signal from YPbPr or YCbCr terminals.
D Sub Select signal from D Sub (15 pin D sub) terminals.
DVI Select signal from DVI terminals.
Note:
l
When you select to view program from
signal. To properly display the picture s color, please select
l
You may quickly switch from other inputs to TV program by pressing the

BASIC OPERATIONS

p q
CH or CH )
q
or CH , the unit changes channels in sequence. You will see all the channels that the unit has
0 9 number buttons
MUTE button again.
SCART2 and find the color is not properly displayed, maybe the unit is receiving a
directly.
0 9 number buttons
0 9 number buttons
MUTE button.
SCART2 Y/C instead of
number buttons
.
.
SCART2 AV .
p q
or CH / .
Y/C
103