Connections; Cautions Before Connecting - Xoro HTL 2711w Benutzerhandbuch

Cautions before connecting

l Carefully check the terminals for position and type before making any connections.
l
The illustration of the external equipment may be different depending on your model.
l
Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their
terminals.
l
Refer to the operating manual of the external device as well.
l
When connecting an external device, turn the power off to avoid any issues.
Connect a Decoder
How to connect:
Connect the Scart Cable between the unit and the decoder.
To watch Decoder
1. Turn on your LCD TV , press
p q
2. Press CH / to select
3. Turn on your deocder.
Specification of SCART
1 Audio output B (right)
2 Audio input B (right)
3 Audio output A (left)
4 Ground (audio)
5 Ground (blue)
6 Audio input A (left)
7 Blue input
8 Function select (AV control)
Note:
CVBS (VIDEO)
l
The unit receives
signal format automatically. The unit chooses the
92

CONNECTIONS

RF
S-VIDEO
R
AUDIO
L/MONO
VIDEO
SOURCE button on the remote control.
SCART 1 and press ENTER
1
9 Ground (green)
10 Comms data 2
11 Green input
12 Comms data 1
13 Ground (red)
14 Ground (blanking)
15 Red input
16 RGB switching control
signal and
21 pin Euro SCART
connector
to confirm.
interface
RGB SCART1
signal from
RGB
signal prior to the
Decoder
17 Ground (CVBS input & output)
18 Ground (RGB switching control)
19 CVBS output
20 CVBS input
21 Common ground (shield)
interface and is able to identify the
CVBS (VIDEO)
signal.