Instant Pot PRO 60 Bedienungsanleitung Seite 31

Care, cleaning and storage
The multicooker base contains electrical components. To avoid fire, electrical
leakage and/or personal injury, make sure the multicooker base always stays dry.
• DO NOT immerse the multicooker base in water or other liquid or attempt to run
it through a dishwasher.
• DO NOT rinse the heating element.
• DO NOT submerge or rinse the power lead or plug.
Removing and installing parts
Silicone sealing ring
Remove the sealing ring
Grip the edge of the silicone and pull the
sealing ring out from behind the circular
stainless steel sealing ring rack.
With the sealing ring removed, check
the ring rack to make sure it is secured,
centred and an even height all the way
around the lid. Do not attempt to repair
a deformed ring rack.
Instant Tip: The sealing ring is easier
to remove and install when it's wet
and soapy.
Pro-UK-EU_ENG_GSG-2021-02-04.indd 31 Pro-UK-EU_ENG_GSG-2021-02-04.indd 31
WARNING
Install the sealing ring
Place the sealing ring over the sealing ring
rack and firmly press it into place. Make
sure there's no puckering.
It should be snug behind the sealing
ring rack. It may wiggle a bit but
shouldn't fall out when you turn
the lid over.
instantpot.co.uk | 31
2/4/21 3:48 PM 2/4/21 3:48 PM