Instant Pot PRO 60 Bedienungsanleitung Seite 21

Pressure control features
See Releasing pressure: Venting methods for safe depressurisation techniques.
Steam release assembly
The steam release assembly must be fully installed before use.
Steam release cover
Steam release valve
Steam release pipe
What we love about it
When the valve is venting,
the steam release cover
disperses the steam, so the
quick release of pressure is
soft and gentle.
If there is steam in the inner pot, you may notice some resistance when replacing
the lid. Allow the lid to settle into the track completely before closing it.
Do not cover or block the steam release assembly in any way to avoid injury
and/or property damage.
Pro-UK-EU_ENG_GSG-2021-02-04.indd 21 Pro-UK-EU_ENG_GSG-2021-02-04.indd 21
Seal
Vent
Seal Position
When releasing pressure, steam travels up from the
inner pot, through the steam release pipe and out from
the top of the steam release valve — so it's important to
keep the area clean and clear.
The steam release valve sits loosely on the steam
release pipe.
Vent Position
What you should know about it
NOTICE
WARNING
Seal
Vent
instantpot.co.uk | 21
2/4/21 3:48 PM 2/4/21 3:48 PM