Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The pump is used for conveying and metering chemicals in industrial applications.
Depending on the material version, the pump is designed for acidic and alkaline products.
Proper use particularly includes the following points:
Only validated chemical liquids may be metered.
n
n
The temperature range, the permissible ambient temperature and the max. media
temperature are permissible only as described in the
Set up the pressure supply only as prescribed in the
n
n
The pump has been developed, designed and built for industrial and commercial use.
The unit is not intended for private use.
Reasonable foreseeable incorrect use
To maintain proper function, please pay attention to the particular handling instructions for
the pump. These can avoid any reasonably foreseeable incorrect use, according to the
risk analysis conducted by the manufacturer.
n
Incorrect use of models
(e.g. incorrect sealing materials, incorrect pump head materials).
n
Operation with too high or too low supply air pressure.
n
Excessive back-pressures.
n
Excessive ambient temperatures.
Excessive media temperature.
n
n
Incompatible accessory parts.
Incorrect metering lines.
n
n
Line cross-sections too small.
n
Excessive viscosities.
n
Use of unsuitable metering media.
Unauthorised modifications and spare parts
CAUTION!
Changes or modifications are not permitted without prior, written permission
from Ecolab Engineering GmbH and shall result in the forfeiting of any and all
warranty entitlements. Original spare parts and accessories approved by the
manufacturer are designed to increase safety.
The use of other parts excludes the warranty for the resulting consequences.
Note that CE conformity expires if subsequent modifications are made.
Ä Technical data .
Ä Technical data .
13
Safety
417101420 Rev. 7-03.2024
Werbung
