Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cutting width
Weight
Subject to technical changes!
Rechargeable battery / battery charger
The technical data for the rechargeable battery and
battery charger can be found in the accompanying
operating manual.
Information about noise level measured in accord-
ance with applicable standards:
Sound pressure L
= 85.0 dB
pA
Measurement uncertainty K
PA
Sound power L
= 96.1 dB
WA
Measurement uncertainty K
PA
Wear hearing protection.
Excessive noise can result in a loss of hearing.
Vibration A
(left/right) = 7.218 m/s
hv
Measurement uncertainty K
PA
Keep the noise level and vibration to a minimum!
• Only use faultless devices.
• Maintain and clean the device at regular intervals.
• Adapt your working methods to the device.
• Do not overload the device.
• Have the device checked if necessary.
• Switch the device off if it is not in use.
• Wear gloves.
When using the petrol lawnmower for extended peri-
ods, vibration-induced circulatory problems may oc-
cur (white finger disease).
Information about the duration of use cannot be pro-
vided in this case, since this can vary from person to
person.
Raynaud's syndrome is a vascular disease that
causes the small blood vessels on the fingers and
toes to cramp in spasms. The affected areas are no
longer supplied with sufficient blood and therefore
appear extremely pale. The frequent use of vibrating
devices can cause nerve damage in people whose
circulation is impaired (e.g. smokers, diabetics).
If you notice unusual adverse effects, stop working
immediately and seek medical advice.
The following factors can influence the condition:
• Circulatory problems in the user's hands
• Low outside temperatures
• Extended periods of use
We therefore recommend you wear warm work gloves
and take regular breaks.
7. Unpacking
• Open the packaging and carefully remove the de-
vice from the packaging.
51 cm
33 kg
= 3 dB
= 1.83 dB
2
= 1.5 m/s
2
www.scheppach.com
• Remove the packaging material, as well as the
packaging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of
the warranty period.
• Familiarise yourself with the product by means of
the operating instructions before using for the first
time.
• With accessories as well as wearing parts and
replacement parts use only original parts. Spare
parts can be obtained from your specialist dealer.
• When ordering please provide our article number
as well as type and year of manufacture for your
equipment.
m ATTENTION!
The device and the packaging material are not
children's toys! Do not let children play with
plastic bags, films or small parts! There is a dan-
ger of choking or suffocating!
8. Assembly / Before commission-
ing
Assembling the components
Some parts of the delivery come disassembled. For
quick and easy assembly, read and follow the instruc-
tions below.
Note!
You will need the following additional tools, which is
not included in the scope of delivery, for assembly,
and also for maintenance work:
• One oil collecting tray, flat (for oil change)
• A 1 litre measuring beaker (oil / petrol-proof)
• A petrol canister (5 litres is sufficient for approx. 6
hours of operation)
• A funnel (to suit the petrol filler neck of the tank)
• Household wipes (to wipe up oil/petrol residue; dis-
pose of these at a filling station)
• A petrol suction pump (plastic version, available in
DIY stores)
• An oil can with hand pump (available in DIY stores)
• 0.4 l Engine oil SAE30 / 10W-30 / 10W-40
Assembly
1. Remove the lawnmower and attachments from
the packaging and check if all parts are available.
2. Screw the lower push bar (6a) to both sides of
the mower with one screw (c), one washer small
(b) and one plastic star nut (a) each. When doing
so, make sure that the cable pulls that will be at-
tached later are not in the way (Fig.2-3).
GB | 33
Werbung
