Product-Specific Safety Instructions; Personal Protective Equipment; Emergency Information; Goods-In Inspection - Abicor Binzel RTM ABIx MT EasyTeach Originalbetriebsanleitung

RTM ABIx MT EasyTeach
► To prevent the formation of phosgene gas, rinse workpieces that have been degreased with chlorinated
solvents using clean water. Do not place degreasing baths containing chlorine in the vicinity of the
welding area.
► Adhere to the general fire protection regulations and remove flammable materials from the vicinity of
the welding work area prior to starting work. Provide appropriate fire extinguishing equipment in the
workplace.
Safety instructions for personal protective clothing
► Do not wear loose fitting clothing or jewelry.
► Use a hair net for long hair.
► Wear safety goggles, protective gloves, and a respiratory mask, if necessary.

2.4 Product-specific safety instructions

Electric shock from electronic components
Improper work on electronic components may result in hazardous electric shocks.
► The device should only be connected by a qualified electrician.
► Disconnect the electrical power supply.
Risk of injury due to unexpected start
If power is supplied to the robot during maintenance or disassembly, parts can start running unexpectedly
and cause injuries.
► Observe the documentation for the system components.
► Disconnect the electrical power supply.

2.5 Personal protective equipment

► Wear your personal protective equipment (PPE).
► Ensure that others in close proximity are also wearing personal protective equipment.
Personal protective equipment consists of protective clothing, safety goggles, a class P3 respiratory mask,
protective gloves, and safety shoes.

2.6 Emergency information

► In the event of an emergency, immediately disconnect the following supplies:
— Electrical power supply
— Gas supply

3 Scope of delivery

— 1× RTM ABIx MT EasyTeach multifunctional flange incl. attachment materials
— 1× connection cable
— 1× operating instructions
► Order the equipment parts and wear parts separately.
► The order data and ID numbers for the equipment parts and wear parts can be found in the
current catalog.
► For more information about points of contact, consultation, and orders, visit www.binzel-abicor.com.
Although the items delivered are carefully checked and packaged, it is not possible to fully rule out the risk
of transport damage.

Goods-in inspection

► Use the delivery note to check that everything has been delivered.
► Check the delivery for damage (visual inspection).
WARNING
CAUTION
3 Scope of delivery
EN - 5