Atlas Copco ETV ST61-150-13 Sicherheitshinweise Seite 8

Safety Information
Country of origin
Please refer to the information on the product label.
Warranty
• Product warranty will expire 12 months after the product
is first taken into use, but will in any case expire at the
latest 13 months after delivery.
• Normal wear and tear on parts is not included within the
warranty.
• Normal wear and tear is that which requires a part
change or other adjustment/overhaul during standard
tools maintenance typical for that period (expressed
in time, operation hours or otherwise).
• The product warranty relies on the correct use, mainte-
nance, and repair of the tool and its component parts.
• Damage to parts that occurs as a result of inadequate
maintenance or performed by parties other than Atlas
Copco or their Certified Service Partners during the war-
ranty period is not covered by the warranty.
• To avoid damage or destruction of tool parts, service the
tool according to the recommended maintenance sched-
ules and follow the correct instructions.
• Warranty repairs are only performed in Atlas Copco
workshops or by Certified Service Partners.
Atlas Copco offers extended warranty and state of the art
preventive maintenance through its ToolCover contracts. For
further information contact your local Service representative.
For electrical motors:
• Warranty will only apply when the electric motor has not
been opened.
ServAid
ServAid is a portal that contains the most up-to-date product
information such as:
- Safety Information
- Installation, Operation and Service Instructions
- Exploded views
It is also possible to order spare parts, service tools and ac-
cessories for the product of your choice directly from Ser-
vAid. It is continuously updated with information about new
and redesigned products.
If translations exist, you can view content in the language of
your choice. ServAid offers advanced search functionality of
our entire product range and can also be used to display in-
formation about obsolete products.
ServAid is available on DVD and on the website:
https://servaid.atlascopco.com
For further information contact your Atlas Copco sales repre-
sentative or e-mail us at:
servaid.support@se.atlascopco.com
Safety Data Sheets MSDS/SDS
The safety data sheets describes chemical products sold by
Atlas Copco.
8 © Atlas Copco Industrial Technique AB - 9836 2596 00
For more information, consult the website:
www.atlascopco.com
Choose Products - Safety Data Sheets, and follow the in-
structions on the page.
Product safety video for nutrunners
Learn more about safety features on Atlas Copco nutrunners
and what measures the operator has to take for a safe opera-
tion. Click the link or scan the QR code below to view the
video:
http://www.atlascopco.com/videogallery/
#detail/77f67648-30f0-4b92-bab6-885ea6b054db
Caractéristiques techniques
Alimentation électrique
Alimentation électrique
Tension (V)
Puissance (W)
Déclarations
Remarque
Many events in the operating environment may affect the
tightening process and shall require a validation of results. In
compliance with applicable standards and/or regulations, we
hereby require you to check the installed torque and rota-
tional direction after any event that can influence the tighten-
ing result. Examples of such events include but are not lim-
ited to:
• initial installation of the tooling system
• change of part batch, bolt, screw batch, tool, software,
configuration or environment
• change of air- or electrical connections
• change in line ergonomics, process, quality procedures
or practices
• changing of operator
• any other change that influences the result of the tighten-
ing process
The check should:
• Ensure that the joint conditions have not changed due to
events of influence.
• Be done after initial installation, maintenance or repair
of the equipment.
• Occur at least once per shift or at another suitable fre-
quency.
ETV ST61-150-13
200
1500