Handicare 1100 Bedienungsanleitung Seite 7

The carrying out of alterations to the product is not permitted and doing so will invalidate the warranty. The manufacturer is not liable
for damage resulting from such alterations.
The manufacturer accepts no liability for damage or injury caused by the non or inadequate observance of the safety regulations and
instructions in this manual, or by negligence during the installation, use, maintenance and repair of this stairlift.
Installation and servicing should only be carried out by dealers or installers/service engineers authorised by the manufacturer in
accordance with local regulations.
The wall mounted remote controls operate on a infrared frequency; Handicare is unable to accept responsibility for system inoperability
in the unlikely event of interference from signals external to this stairlift.
Technical specifications
100-240 V~
Supply voltage
Frequency 50/60 Hz
Current 1.0 A
0-36 watt
Power consumption
Fuses 20 A
140 kg
Max.load (inclination 25°-45°)
Max.load (inclination 45°-50°) 130 kg
Max.load (SlideTrack) 120 kg
Technical specifications NA
Supply voltage 120 V~
60 Hz
Frequency
Current 0.83 A
20 watt
Power
Fuses 20 A
Max.load (inclination 25°-45°) 308 lbs
286 lbs
Max.load (inclination 45°-50°)
Max.load (SlideTrack) 264 lbs
If your lift does not have a "two-way voice communication device" you can order this option at any time, which can be connected to the
stairlift if necessary, if the personal (living) circumstances of the user have changed in such a way that the connection of such a device
to the stairlift is an appropriate solution for the possible risk that the user cannot call for help quickly enough when he / she gets stuck
on the stairlift due to a malfunction or otherwise.
The information provided in this manual is based on general specifications regarding the construction, material properties and working
methods known to us at the time of publication; alterations and improvements are therefore anticipated.
The Dutch manual is the original language.
I/We certify that on .................I/we thoroughly examinated this lift and that the foregoing is a correct report of the result. I/We declare that the
erected stairlift is compound with approved components and installed according to the instructions in the installation manual. I/We also declare that
I/we have instructed the user by telling him/her all users practice. The user is independently able to use the lift safely without further instruction.
The user manual has been handed over to the user.
Name Engineer:
.. .. ... .. ... ... ... .. ... . ... . ... . ... . ... . ... . ... . ... . ... .
Quali cations:
.. .. ... .. ... ... ... .. ... . ... . ... . ... . ... . ... . ... . ... . ... .
Signing date:
.. .. ... .. ... ... ... .. ... . ... . ... . ... . ... . ... . ... . ... . ... .
Signature:
Adress:
Herewith con rms the user of the stairlift that the above mentioned engineer(s) has declared all users practice and that he/she is known with the
complete operation as instructed person.
Name:
.. .. ... .. ... ... ... .. ... . ... . ... . ... . ... . ... . ... . ... . ... .
City:
.. .. ... .. ... ... ... .. ... . ... . ... . ... . ... . ... . ... . ... . ... .
Signing date:
.. .. ... .. ... ... ... .. ... . ... . ... . ... . ... . ... . ... . ... . ... .
We, Handicare Newtonstraat 35, 1704 SB Heerhugowaard, the Netherlands, declare that the Handicare 1100 is in conformity with the provisions
of the Machinery Directive 2006/42/EC, Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU.
The stairlift has been designed and manufactured in accordance with the following standards: EN 81-40, ISO 9386-2, EN ISO 12100-1,
EN ISO 12100-2, EN ISO 14121, EN60204-1
Liftinstituut B.V., Buikslotermeerplein 361, 1025 XE Amsterdam, The Netherlands. Identi cationnr 0400 has issued an EC-certi cate in compliance
with machinery directive 2006/42/EC with reference NL17-400-1001-015-10.
The Technical Construction File for the above Stairlift is retained at the manufacturers address. A copy is retained at the Liftinstituut B.V. of ce.
Heerhugowaard, The Netherlands, 15 april 2023.
J. Hopman, Managing director
The declaration of conformity is legal after the installation checklist and the declaration instructed person have been signed off by the engineer and the user.
The installation checklist and the declaration instructed person shall be saved by the dealer and made available to Handicare on request.
Speed
Ambient temperature
Relative humidity
Usage
Noise
Use
Speed
Ambient temperature
Relative humidity
Usage
Noise
Use
DECLARATION ENGINEER
Name Engineer:
.. .. ... .. ... ... ... .. ... . ... . ... . ... . ... . ... . ... . ... . ... .
Quali cations:
.. .. ... .. ... ... ... .. ... . ... . ... . ... . ... . ... . ... . ... . ... .
Signing date:
.. .. ... .. ... ... ... .. ... . ... . ... . ... . ... . ... . ... . ... . ... .
Signature:
If employed by a company/association>name/adress:
DECLARATION INSTRUCTED PERSON
Adress:
.. .. ... .. ... ... ... .. ... . ... . ... . ... . ... . ... . ... . ... . ... .
Phone number:
.. .. ... .. ... ... ... .. ... . ... . ... . ... . ... . ... . ... . ... . ... .
Signature:
EC DECLARATION OF CONFORMITY
Date put into service: ..........................
max. 0.15 m/s
0 - 40 °C
20 - 80 %
10 rides per day
56 dB
Indoor
max. 0.49 f/s
32 - 104 °F
20 - 80 %
10 rides per day
56 dB
Indoor
Serial no. unit:
Project:
Date:
USER MANUAL | 5
EN