Scheppach RS 350 Original Bedienungsanleitung Seite 20

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment and
success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the de-
vice. The operating instructions are intended to help
the user to become familiar with the machine and take
advantage of its application possibilities in accordance
with the recommendations. The operating instructions
contain important information on how to operate the
machine safely, professionally and economically, how
to avoid danger, costly repairs, reduce downtimes and
how to increase reliability and service life of the ma-
chine. In addition to the safety regulations in the op-
erating instructions, you have to meet the applicable
regulations that apply for the operation of the machine
in your country. Keep the operating instructions pack-
age with the machine at all times and store it in a plas-
tic cover to protect it from dirt and moisture. Read the
instruction manual each time before operating the ma-
chine and carefully follow its information. The machine
can only be operated by persons who were instructed
concerning the operation of the machine and who are
informed about the associated dangers. The minimum
age requirement must be complied with.
20 | GB
In addition to the safety instructions contained in this
operating manual and the specific regulations of your
country, the technical rules generally accepted for the
operation of machines of the same type must be ob-
served.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions and
the safety information.
2. Device description
1. Transport handles
2. Wheels
3. Knob/angle adjustment lock
4. Angle ratchet
5. Hydraulic damper
6. Motor
7. Motor belt cover
8. Protection mat
9. Brush bar
10. Sieve drum
11. Drum belt
12. Drum belt cover
13. Safety splint
14. Drum bars
15. Rings
16. Sieve insert
17. Drive belt
3. Scope of delivery
• 1x rotary sieve, pre-assembled
• 2x transport handles (1)
• 2x wheels ø 180 (2)
• 1x knob (3)
• 2x screws (A)
• 1x frame bars (B)
• 2x screws (C)
• 2x nut (D)
• 1x Operating instructions
4. Proper use
The machine may only be used in the intended man-
ner. Any use beyond this is improper. The user/opera-
tor, not the manufacturer, is responsible for damages
or injuries of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly
instructions and operating information in the operating
manual.
www.scheppach.com