Simons Voss Technologies Digital SmartHandle AX Kurzanleitung Seite 26

1. Intended use
1. Intended use
Products in the SmartHandle AX range consist of electronic door fittings.
Users can engage SmartHandle AX and open the door onto which it is fitted
with an authorised ID medium, such as a transponder.
The corresponding authorisations need to be issued using an electronic
locking plan.
Products in the SmartHandle AX range may only be used for locking and
unlocking doors. No other use is permitted.
2. General safety instructions
Signal word: Possible immediate effects of non-compliance
WARNING: Death or serious injury (possible, but unlikely), CAUTION: Minor
injury, IMPORTANT: Property damage or malfunction, NOTE: Low or none
WARNING
Blocked access
Access through a door may stay blocked due to incorrectly fitted and/or in-
correctly programmed components. SimonsVoss Technologies GmbH is not
liable for the consequences of blocked access such as access to injured or
endangered persons, material damage or other damage!
Blocked access through manipulation of the product
If you change the product on your own, malfunctions can occur and access
through a door can be blocked.
 Modify the product only when needed and only in the manner described
in the documentation.
Do not swallow battery. Danger of burns from hazardous substances
This product contains lithium button cell batteries. Swallowing the button
cell battery, in can result in severe internal burns leading to death in as little
as two hours.
1. Keep new and used batteries away from children.
2. If the battery compartment does not close securely, cease using the
product and keep it away from children.
3. If you think batteries have been swallowed or are in any part of the
body, seek medical attention immediately.
Risk of explosion due to incorrect battery type
Inserting the wrong type of battery can cause an explosion.
Only use the batteries specified in the technical data.

CAUTION
Fire hazard posed by batteries
The batteries used may pose a fire or burn hazard if handled incorrectly.
1. Do not try to charge, open, heat or burn the batteries.
2. Do not short-circuit the batteries.
IMPORTANT
Damage resulting from electrostatic discharge (ESD) when enclosure is
open
This product contains electronic components that may be damaged by elec-
trostatic discharges.
1. Use ESD-compliant working materials (e.g. Grounding strap).
2. Ground yourself before carrying out any work that could bring you into
contact with the electronics. For this purpose, touch earthed metallic
surfaces (e.g. door frames, water pipes or heating valves).
Damage resulting from liquids
This product contains electronic and/or mechanic components that may be
damaged by liquids of any kind.
Keep liquids away from the electronics.

Damage resulting from aggressive cleaning agents
The surface of this product may be damaged as a result of the use of unsuit-
able cleaning agents.
Only use cleaning agents that are suitable for plastic or metal surfaces.

26 / 52
Digital SmartHandle AX Scandinavian Oval
Damage as a result of mechanical impact
This product contains electronic components that may be damaged by
mechanical impacts of any kind.
1. Avoid touching the electronics.
2. Avoid other mechanical influences on the electronics.
Damage due to polarity reversal
This product contains electronic components that may be damaged by re-
verse polarity of the power source.
Do not reverse the polarity of the voltage source (batteries or mains ad-

apters).
Operational malfunction due to radio interference
This product may be affected by electromagnetic or magnetic interference.
Do not mount or place the product directly next to devices that could

cause electromagnetic or magnetic interference (switching power sup-
plies!).
Communication interference due to metallic surfaces
This product communicates wirelessly. Metallic surfaces can greatly reduce
the range of the product.
Do not mount or place the product on or near metallic surfaces.

NOTE
Intended use
SimonsVoss-products are designed exclusively for opening and closing
doors and similar objects.
Do not use SimonsVoss products for any other purposes.

Malfunctions due to poor contact or different discharge
Contact surfaces that are too small/contaminated or different discharged
batteries can lead to malfunctions.
1. Only use batteries that are approved by SimonsVoss.
2. Do not touch the contacts of the new batteries with your hands.
3. Use clean and grease-free gloves.
4. Always replace all batteries at the same time.
Different times for G2 locks
The internal time unit of the G2 locks has a technical tolerance of up to ± 15
minutes per year.
Qualifications required
The installation and commissioning requires specialized knowledge.
Only trained personnel may install and commission the product.

Modifications or further technical developments cannot be excluded and
may be implemented without notice.
The German language version is the original instruction manual. Other lan-
guages (drafting in the contract language) are translations of the original in-
structions.
Read and follow all installation, installation, and commissioning instructions.
Pass these instructions and any maintenance instructions to the user.
3. Product-specific safety instructions
IMPORTANT
Damage caused by unsuitable tools
If you try to open the case with unsuitable tools, the case may be damaged.
 Use only the supplied SimonsVoss opening tool.
Loss of the precise guidance of the handle
It may be difficult to install on mortise locks with a retaining nut.
Do not mechanically alter the locking nut. The handle would then lose

its precise guidance.
EN