Renkforce Pro 10+ Bedienungsanleitung Seite 38

5 Delivery content
Printer
Housing
Magnetic mat
Spool holder
Filament tube
Ejector rod
Mains cable
USB memory stick
USB cable
Z-sensor calibration tool
Hex wrench
Pair of tweezers
Side cutter
2x Small needle
4x Hex key (1.5mm / 2mm / 2.5mm / 3mm)
Safety instructions
Quick start guide
Operating instructions
Housing assembly instructions
38
6 Description of symbols
The following symbols are on the product/appliance or are used in the text:
For safe and proper use, follow these instructions. Keep them for future
reference.
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by
electric shock.
The symbol warns of hot surfaces that can result in severe burns when
touched. Read the information carefully.
The symbol warns of rotating gears that can pull in fingers and hair.
The symbol warns of closing mechanical parts that can trap hands and fin-
gers.
This product must only be used in dry, enclosed indoor areas. It must not
become damp or wet.