Renkforce Pro 10+ Bedienungsanleitung Seite 51

11.1.3 Levelling the print bed manually
You level the print bed manually to prepare it for "Auto-levelling". Manual levelling must
always be followed by Z-offset calibration and "Auto-levelling".
Insert the print bed and magnetic mat.
Touch to move the extruder to its zero
position.
Activate the Z-offset calibration.
Open the menu Tools.
Touch the distance increment 0.1 mm
to activate it.
Open the menu Manual.
Slide one sheet of A4 paper (80 g)
between the nozzle and the print bed.
51