Renkforce Pro 10+ Bedienungsanleitung Seite 60

->System Volume Information/
->FOUND.000/
->routerConfig.txt
8. Click the network configuration file.
9. Click .
the display shows the IP address of the printer to
Æ
indicate successful connection.
12. Click Search.
60
IP
："192.168.33.112"
："3dprinter-A014D6"
if the display shows the IP address "0.0.0.0", the
Æ
connection failed. Check if the SSID and the pass-
word are correct.
10. (For multiple printers) Load the same network con-
figuration file onto the other printers.
13. Click the down arrow and select your desired printer from the list. You can use the IP address displayed behind
each printer name to distinguish the printers in the list.
14. Click Connect to connect your computer to the printer.
11. Connect your computer to the Wi-Fi network.