Renkforce Pro 10+ Bedienungsanleitung Seite 57

13.2 Setting up Wi-Fi direct mode (computer-to-printer)
Set up Wi-Fi direct mode to wirelessly connect your computer to one printer at a time.
1. On the printer, open the menu System.
3. Connect your computer to the printer's Wi-Fi network. 4. Open the Wi-Fi configurator software.
2. Open the menu Internet.
The printer displays its Wi-Fi network name.
Æ
5. Click Search.
IP
："192.168.33.112"
："3dprinter-A014D6"
57